Couplings made of malleable iron for a maximum working pressure of 12 bar in dry applications and 40 bar in wet applications.

This category of couplings for blasting and shotcrete brings together the parts used to connect and join the hoses of the line:

  • Quick coupling for hose: for hose from 3/4″ to 1 1/2″ inside diameter (39 to 62 mm outside diameter).
  • Quick coupling with female thread: for 1 1/4″ and 1 1/2″ hose.
  • Hose ferrule with female thread: from 3/4″ to 1 1/2″.
  • Hose fitting: in malleable iron, for hose from 19×6 to 38×9 mm, or in nylon, for 25×7 and 32×8 mm.
  • Universal NBR gasket and galvanized steel fixing screws (Senkkopf 4.8×16 mm).

To choose, first measure the hose: inside and outside diameter for the quick coupling for hose and the ferrule, or the hose size shown on the product page (for example, 25×7) for the hose fittings. Then decide whether the end joins another hose or a female thread. Each product page lists the available sizes and codes.

Filter